RO800 PLUS direct flow reverse osmosis 120lt./h. with electronic faucet

RO800 PLUS is a RO system of the latest generation, designed to offer the highest performances and adapting to the features and the spaces of every kitchen. This device is able to provide up to 2 liters per minutes of osmotic water.

Filtration
Filter 1: Sediment + Carbon Block
Filter 2: RO Membrane + Carbon Gac

Filters replacement
Once you have closed the inlet water and switched off the device, you just have to extract the filter cover, push these placement button and the filter will be released to be removed. Now you can insert the new filter in its seat until you'll hear a "click" and keep pressed for 3 seconds the reset button in order to restore the filter length.

Smart faucet
The led placed on the faucet's body shows the water quality and provide a memo for the filter replacement.

Features:
- Voltage/rated frequency: 100-240V. - 50/60 Hz
- Rated power: 75W.
- Inlet pressure: 0,1-0,4 MPa (1-4 bar)
- Flow rate: 2 l./min.
- Working temperature: 4-40 °C
- Dimensions (mm.): 425x130x252

Accessories included in the packaging:
1x 1/4" PE red tube (2mt.)
1x 1/4" blu tube (2mt.)
1x 3/8" tube (2mt.)
5x Cable ties
1x Instruction manual
1x Smart faucet
1x Drain clip
10x 1/4" clip
5x 3/8" clip
1x Transformer
1x 3 ways ball valve
1x Tube Elbow Union OD tube - OD stem 3/8" x 3/8"
2x Tube Elbow Union OD tube - OD stem 1/4"
1x Union connector OD tube - OD tube 1/4" x 1/4"

The reverse osmosis is not a device that makes water drinkable(non-drinkable water into drinkable water) and it work only if it's installed on water compliant with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water.
Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer instructions.
The pollutant parts removed or reduced by this system are not necessarily in your water.
In case of potable inlet water of bad quality, it's possible to close all the outgoing mineral salts regulator (TDS) and to mount, as the last stage, a remineralizer filter that stabilizes the Ph.
1x Ionicore remineralizer PH adjustment coconut in line filter (GAC) 1/4" FPT 2"x10".

* We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.